dmesg - Test 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.92-31-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP Sun Oct 22 06:56:24 UTC 2017 (1d80e8a)
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000084683fff] usable
BIOS-e820: [mem 0x0000000084684000-0x0000000084684fff] ACPI NVS
BIOS-e820: [mem 0x0000000084685000-0x0000000084685fff] reserved
BIOS-e820: [mem 0x0000000084686000-0x000000008d2dcfff] usable
BIOS-e820: [mem 0x000000008d2dd000-0x000000008ea0cfff] reserved
BIOS-e820: [mem 0x000000008ea0d000-0x000000008ea4ffff] ACPI data
BIOS-e820: [mem 0x000000008ea50000-0x000000008f201fff] ACPI NVS
BIOS-e820: [mem 0x000000008f202000-0x000000008faa1fff] reserved
BIOS-e820: [mem 0x000000008faa2000-0x000000008fafffff] usable
BIOS-e820: [mem 0x000000008fb00000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: System manufacturer System Product Name/MAXIMUS VIII RANGER, BIOS 3504 06/30/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8fb00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc40-0x000fcc4f] mapped at [ffff8800000fcc40]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x02415000, 0x02415fff] PGTABLE
BRK [0x02416000, 0x02416fff] PGTABLE
BRK [0x02417000, 0x02417fff] PGTABLE
BRK [0x02418000, 0x02418fff] PGTABLE
BRK [0x02419000, 0x02419fff] PGTABLE
BRK [0x0241a000, 0x0241afff] PGTABLE
RAMDISK: [mem 0x35ec5000-0x36f59fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008EA1A0A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008EA44388 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008EA1A200 02A181 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008F201C40 000040
ACPI: APIC 0x000000008EA444A0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008EA44528 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000008EA4EF68 000078 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: MCFG 0x000000008EA445C8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008EA44608 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000008EA44998 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000008EA44A38 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008EA47B90 00253E (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008EA4A0D0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008EA4A108 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
ACPI: SSDT 0x000000008EA4A130 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008EA4AC48 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000008EA4AC90 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008EA4BB70 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008EA4BC08 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008EA4BC30 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008EA4BED0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000008EA4EED8 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008EA4EF10 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46efd3000-0x46effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x0000000084683fff]
node 0: [mem 0x0000000084686000-0x000000008d2dcfff]
node 0: [mem 0x000000008faa2000-0x000000008fafffff]
node 0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 4178644
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 8973 pages used for memmap
DMA32 zone: 574265 pages, LIFO batch:31
Normal zone: 56256 pages used for memmap
Normal zone: 3600384 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x84684000-0x84684fff]
PM: Registered nosave memory: [mem 0x84685000-0x84685fff]
PM: Registered nosave memory: [mem 0x8d2dd000-0x8ea0cfff]
PM: Registered nosave memory: [mem 0x8ea0d000-0x8ea4ffff]
PM: Registered nosave memory: [mem 0x8ea50000-0x8f201fff]
PM: Registered nosave memory: [mem 0x8f202000-0x8faa1fff]
PM: Registered nosave memory: [mem 0x8fb00000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88046ec00000 s95128 r8192 d31848 u524288
pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113330
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4569116K/16714576K available (6360K kernel code, 1469K rwdata, 4776K rodata, 2108K init, 2612K bss, 366524K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3792.095 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.19 BogoMIPS (lpj=15168380)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K
ftrace: allocating 25931 entries in 102 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008d99d000 end: 0x0000008d9bcfff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-7600K CPU @ 3.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, 32-deep LBR, perf_event_intel: Skylake events, perf_event_intel: full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: smpboot: smpboot: #1smpboot: #2smpboot: #3
x86: Booted up 1 node, 4 CPUs
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Total of 4 processors activated (30336.76 BogoMIPS)
node 0 initialised, 2944734 pages in 24ms
devtmpfs: initialized
evm: security.selinux
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x84684000-0x84684fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8ea50000-0x8f201fff] (8069120 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:40:50, date: 12/06/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 35 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88046EC46000 00079B (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88018FCA2800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf230000-0xdf23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf24d000-0xdf24dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf248000-0xdf249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf24c000-0xdf24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf24b000-0xdf24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf244000-0xdf247fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf240000-0xdf243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf220000-0xdf22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf24a000-0xdf24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf200000-0xdf21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x84684000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8d2dd000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8fb00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1d.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1d.0: bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1d.0: bridge window [mem 0x90200000-0x903fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16980K
DMAR: [Firmware Bug]: RMRR entry for device 03:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x892dd000-0x8d2dd000] (64MB) mapped at [ffff8800892dd000-ffff88008d2dcfff]
Scanning for low memory corruption every 60 seconds
kgr: successfully initialized
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1512556851.376:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
aer 0000:00:1c.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1b.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1b.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1d.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1d.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90001c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Unable to detect cache hierarchy for CPU 0
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
microcode: CPU0 sig=0x906e9, pf=0x2, revision=0x5e
microcode: CPU1 sig=0x906e9, pf=0x2, revision=0x5e
microcode: CPU2 sig=0x906e9, pf=0x2, revision=0x5e
microcode: CPU3 sig=0x906e9, pf=0x2, revision=0x5e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:678:678
rtc_cmos 00:03: setting system clock to 2017-12-06 10:40:51 UTC (1512556851)
PM: Checking hibernation image partition /dev/sdb6
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2108K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1816K
Freeing unused kernel memory: 1368K
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
SCSI subsystem initialized
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.92-31-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.92-31-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
libata version 3.00 loaded.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 249
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.98 Thu Oct 26 15:16:01 PDT 2017 (using threaded interrupts)
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 248
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.92-31-default xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.92-31-default xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.98 Thu Oct 26 14:41:13 PDT 2017
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b200 irq 126
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
usb 1-5: new high-speed USB device number 2 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 0
ata1.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda3 sda4
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-5: New USB device found, idVendor=1a40, idProduct=0101
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB 2.0 Hub
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3792.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d51a4e4511, max_idle_ns: 881590775377 ns
usb 1-7: new full-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=046d, idProduct=c22d
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: G510s Gaming Keyboard
usb 1-7: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G510s Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C22D.0001/input/input6
hid-generic 0003:046D:C22D.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech G510s Gaming Keyboard] on usb-0000:00:14.0-7/input0
input: Logitech G510s Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C22D.0002/input/input7
usb 1-5.4: new high-speed USB device number 4 using xhci_hcd
hid-generic 0003:046D:C22D.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech G510s Gaming Keyboard] on usb-0000:00:14.0-7/input1
usb 1-5.4: New USB device found, idVendor=1a40, idProduct=0101
usb 1-5.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5.4: Product: USB 2.0 Hub
hub 1-5.4:1.0: USB hub found
hub 1-5.4:1.0: 4 ports detected
usb 1-8: new full-speed USB device number 5 using xhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 8:22 present
PM: Looking for hibernation image.
usb 1-8: New USB device found, idVendor=046d, idProduct=c068
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: G500
usb 1-8: Manufacturer: Logitech
usb 1-8: SerialNumber: 18ED7DB3C10018
input: Logitech G500 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C068.0003/input/input8
hid-generic 0003:046D:C068.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:14.0-8/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C068.0004/input/input9
hid-generic 0003:046D:C068.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:14.0-8/input1
usb 1-5.4.1: new full-speed USB device number 6 using xhci_hcd
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 1-5.4.1: New USB device found, idVendor=28de, idProduct=1142
usb 1-5.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4.1: Product: Steam Controller
usb 1-5.4.1: Manufacturer: Valve Software
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.1/1-5.4.1:1.0/0003:28DE:1142.0005/input/input10
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
hid-generic 0003:28DE:1142.0005: input,hidraw4: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-5.4.1/input0
hid-generic 0003:28DE:1142.0006: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.4.1/input1
hid-generic 0003:28DE:1142.0007: hiddev0,hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.4.1/input2
hid-generic 0003:28DE:1142.0008: hiddev0,hidraw7: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.4.1/input3
hid-generic 0003:28DE:1142.0009: hiddev0,hidraw8: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.4.1/input4
usb 1-10: new high-speed USB device number 7 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 1-10: New USB device found, idVendor=12d1, idProduct=1082
usb 1-10: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-10: Product: PLK-L01
usb 1-10: Manufacturer: HUAWEI
usb 1-10: SerialNumber: 0123456789ABCDEF
systemd-journald[113]: Received SIGTERM from PID 1 (systemd).
systemd: 21 output lines suppressed due to ratelimiting
random: nonblocking pool is initialized
usb 1-5.4.3: new full-speed USB device number 8 using xhci_hcd
EXT4-fs (sda3): re-mounted. Opts: discard,acl,user_xattr,errors=remount-ro
usb 1-5.4.3: New USB device found, idVendor=046d, idProduct=c52b
usb 1-5.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4.3: Product: USB Receiver
usb 1-5.4.3: Manufacturer: Logitech
audit: type=1400 audit(1512556853.724:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1512556853.732:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=510 comm="apparmor_parser"
audit: type=1400 audit(1512556853.732:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1512556853.736:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=518 comm="apparmor_parser"
audit: type=1400 audit(1512556853.740:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=523 comm="apparmor_parser"
audit: type=1400 audit(1512556853.748:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=527 comm="apparmor_parser"
audit: type=1400 audit(1512556853.748:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=527 comm="apparmor_parser"
audit: type=1400 audit(1512556853.748:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=527 comm="apparmor_parser"
audit: type=1400 audit(1512556853.748:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=527 comm="apparmor_parser"
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
usb 1-5.4.4: new low-speed USB device number 9 using xhci_hcd
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Adding 2097148k swap on /dev/sdb6. Priority:-1 extents:1 across:2097148k FS
input: PC Speaker as /devices/platform/pcspkr/input/input11
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
asus_wmi: ASUS WMI generic driver loaded
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
PTP clock support registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
asus_wmi: Number of fans: 1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
usb 1-5.4.4: language id specifier not provided by device, defaulting to English
usb 1-5.4.4: New USB device found, idVendor=06b4, idProduct=1c70
usb 1-5.4.4: New USB device strings: Mfr=2, Product=2, SerialNumber=2
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard,acl,user_xattr,errors=remount-ro
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
input: HID 06b4:1c70 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.4/1-5.4.4:1.0/0003:06B4:1C70.000D/input/input13
hid-generic 0003:06B4:1C70.000D: input,hidraw9: USB HID v1.10 Keyboard [HID 06b4:1c70] on usb-0000:00:14.0-5.4.4/input0
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
logitech-djreceiver 0003:046D:C52B.000C: hiddev0,hidraw10: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5.4.3/input2
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:4d:7b:2e:55:39
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
e1000e 0000:00:1f.6 eth1: renamed from eth0
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
usb-storage 1-10:1.1: USB Mass Storage device detected
scsi host6: usb-storage 1-10:1.1
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.3/1-5.4.3:1.2/0003:046D:C52B.000C/0003:046D:404D.000E/input/input22
logitech-hidpp-device 0003:046D:404D.000E: input,hidraw11: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-5.4.3:1
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: CD-ROM Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
scsi 6:0:0:0: Attached scsi generic sg2 type 5
sr 6:0:0:0: Power-on or device reset occurred
sr 6:0:0:0: [sr0] scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-journald[424]: Received request to flush runtime journal from PID 1
systemd-journald[424]: File /var/log/journal/38e04c8056b36434456fcf98599bf2fa/system.journal corrupted or uncleanly shut down, renaming and replacing.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
audit_printk_skb: 102 callbacks suppressed
audit: type=1305 audit(1512556857.600:45): audit_pid=1125 old=0 auid=4294967295 ses=4294967295 res=1
No iBFT detected.
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3791991392 Hz
vboxdrv: Successfully loaded version 5.1.30_SUSE (interface 0x002a0000)
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
NET: Registered protocol family 17
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-840f8942-a07c-6e72-efed-640a0d78c836) @ PCI:0000:01:00.0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
fuse init (API version 7.23)